Post spacing by exposure
Chain link fence runs are set around height, wind exposure, fabric gauge, and whether the line is beside a parking lot, yard, or service lane. Wider spacing on a tall exposed run is what makes the fence lean later.
Chain Link Fencing, fabricated, delivered, and installed across Ontario, built to spec for contractors, property managers, and industrial sites. The Grate Guys custom-fabricates every piece to your spec, load class, and finish, then ships and installs across the GTA and Ontario.
Fabricated in Canada in our Toronto shop, with Canadian steel.
Tell us what you need and we’ll get you a quote. Free, no-obligation estimate.
Free, no-obligation estimate.
Chain link fence runs are set around height, wind exposure, fabric gauge, and whether the line is beside a parking lot, yard, or service lane. Wider spacing on a tall exposed run is what makes the fence lean later.
Corner posts, end posts, and gate posts carry the pull from the tension wire and fabric. Those posts need heavier pipe and proper footings so the fence does not curl or sag at the ends.
Galvanized, vinyl-coated, heavier-gauge mesh, privacy slats, and barbed extensions all solve different site problems. We match the fence fabric to visibility, corrosion exposure, and the level of access control required.
Swing gates and sliding gates are planned around pavement slope, snow buildup, opening width, and latch hardware. A good fence line still fails if the gate drags or cannot close square.
Custom metalwork made in Canada gives contractors, property teams, and facilities tighter quality control, faster lead times, and fewer cross-border delays. The work is fabricated in our Toronto shop, with Canadian steel and other metals selected when the application requires them.
We support your chain link fencing with Canadian-made fabrication, Canadian steel, clear local coordination, and a shop team close enough to solve site details before they become delays.
Chain link fencing is a practical perimeter system for commercial yards, industrial compounds, utility areas, storage zones, schools, municipal sites, and property lines that need durable access control. The Grate Guys supplies and coordinates galvanized or coated mesh, posts, rails, gates, tension wire, privacy options, and site hardware around your drawings, measurements, and site conditions, made to order in our Toronto shop, licensed, insured, and WSIB-covered, with a workmanship warranty on every order, supplied and installed across the GTA and shipped Canada-wide.
The custom metal grates were fantastic, I didn't expect them to be this good for the price, would be another customer for sure.
Their custom metal grates are great quality and well made. Very happy with the product and would recommend The Grate Guys.
The Grate Guys did a fantastic job with my custom metal grates. Their products, work, and customer service is top notch. Absolutely recommend!
Custom grates were fantastic, definitely use these guys!
Bollards they installed are phenomenal! This project I was working on needed bollards and they did not disappoint.
The Grate Guys did an amazing job on custom metal grates for a project I was working on.
Custom metalwork fabricated in Canada in our Toronto shop, then a tidy install, coordinated with concrete, drainage, doors, and surrounding work where site work is in scope.
Yes. The Grate Guys provides chain link fencing with made-to-measure fabrication, quote support, and Ontario installation or site review where the project requires it.
Yes. Many projects involve more than a grate or metal component. The team can help assess related drainage, concrete, frame, impact, safety, access, or site-condition issues so the quoted solution matches the real problem.
Yes. You can upload photos, drawings, blueprints, measurements, sketches, or specs. For more technical work, shop drawings, takeoffs, specifications, engineering coordination, engineer review, and permit support may be used where required.
Yes. Approved Ontario projects can include site visits, field measurements, installation, repair review, and coordination for related concrete, drainage, access, or fabrication work where appropriate.
The Grate Guys combines 5-star Google-rated service, licensed and insured Ontario work, warranty-backed products where appropriate, and practical problem-solving beyond product-only thinking.
Yes, our custom metalwork is fabricated in Canada in our Toronto shop. We use Canadian steel, and we specify stainless, cast iron, aluminum, or other metals when the application requires them.
Still have a question about chain link fencing? Ask our team directly.
Custom grates, gates, bollards, and structural metalwork, fabricated and installed for contractors, property managers, and industrial sites.
Tell us what you need and we will get you a free, no-obligation quote and on-site assessment, custom metal fabrication with quote-ready support across Toronto and Ontario.
Backed by our workmanship warranty, we stand behind every job · Licensed, Insured & WSIB-Covered
Tell us what you need and we’ll get you a quote. Free, no-obligation estimate.
The Grate Guys provides chain link fencing, delivered and installed with quote-ready support across Toronto and surrounding Ontario communities.
Companies We've Worked With
The Grate Guys fabricates and installs custom metalwork for developers, contractors, institutions, and property groups across Ontario.